Skip to the page

Oppo, Realme and OnePlus batteries

Realme C51 battery model name: BLP923, 5000 mAh pack

Realme C51 uses the BLP923 battery in most listings: 5000 mAh typical at 3.87 V. Check the label before buying.

Codes matched from service listings and teardowns · Updated 2 Nov 2026

Realme (Oppo group)

ModelBLP923

Capacity
5000 mAh typical
Cell
Li-ion polymer

Fits

  • Realme C51
Match the code on your old battery before you buy.

This site is not affiliated with Oppo, Realme or OnePlus; this is an independent explanation.

The Realme C51 battery model name is BLP923 in most listings, with a cell of 5000 mAh typical capacity at 3.87 V. Spare part listings tie this code to the phone's model number RMX3830. If you searched "realme c51 battery model", give a technician BLP923 to order the right pack.

Some listings give BLP923 for certain Oppo A series phones too, but those matches are unsettled, so read your own cell. BLP923 is printed on the cell sticker, under the C51's back panel. On a sealed C51, only a technician should open it, so start with the box and Settings.

Quick facts

Battery codeBLP923 (most listings)
Phone model numberRMX3830 (from parts listings)
Capacity5000 mAh typical; read the rated figure on your own cell
Voltage3.87 V in listings, about 19.4 Wh
Where to see the codeOn the cell sticker, under the back panel
Replacement routeBrand service point or a repair shop you know

Step by step

  1. Confirm the handset name and its RMX number

    Open Settings and go to About device or About phone, whichever your software shows. If you cannot find it, type model in the Settings search bar. Look for RMX3830.

  2. Check the retail box

    The label on the carton prints the phone name, model number and memory version. Keep the box if you still have it, because it settles any doubt about a similar phone name.

  3. Have the back opened by a technician

    The cell sticker shows the code, the mAh figure and the voltage. Ask that it be read aloud or shown to you before anything is removed.

  4. Compare the new pack before fitting

    The new cell should carry BLP923, the same connector shape and a similar thickness. Lay both packs flat and compare the print and size.

Realme C51 battery model name and capacity at a glance

Most parts listings give one answer for this phone: BLP923, a Li-ion polymer pack of 5000 mAh at 3.87 V. BLP marks the code family shared by Oppo, Realme and OnePlus. That family tells you the maker group only. The characters after it are what point to your phone.

Realme quotes 5000 mAh typical for the C51, the BLP923 figure. A label on the cell often shows a rated (minimum) value a shade below it, so treat your own sticker as the final word on that number.

For watt hours, multiply 5000 by 3.87 and divide by 1000. That gives about 19.4 Wh. A different voltage on a C51 pack changes its energy slightly, so compare both figures.

Phones that may share this battery with the C51

The same cell can be used in more than one body, so a repair counter may stock it under an Oppo name. Listings disagree on which phones share it, so treat every row below as a question to check, not a promise.

The C51 and phones some listings pair with BLP923
PhoneStatusNote
Realme C51Matched by most listingsModel number RMX3830, 5000 mAh typical
Oppo A57 4G, A57sListings differRead the label before ordering
Oppo A77s, A77 5G, A78 5GListings differRead the label before ordering

BLP923's full story and phone list is on our BLP923 page. For the wider family of Oppo, Realme and OnePlus codes, use the Oppo battery model list.

Where to read BLP923 on your C51

Software will not print the battery code for you. Settings gives the C51 name and RMX number, which lead you to the code. Look at the carton first, then About device in Settings. Menu names vary by software version, so search Settings if the path differs.

The code itself lives on the cell sticker. The sealed C51 reveals BLP923 only after a technician removes the back and peels the cell tape. Never pry the C51 open at home; the cell sits beside the display flex and a slipped tool can puncture it.

Ask the shop to read the sticker before the old cell goes into the waste bin. A quick picture on your own phone saves a second trip.

Mix-ups between look-alike Realme C phones

Realme has many C-series phones with similar names and similar 5000 mAh figures. People assume they all share one pack. They do not. Always match the code, not the phone class.

  • The Realme C53 and the Realme C55 have their own pages. Open them to see their codes instead of borrowing BLP923.
  • Some sellers publish one long listing that names many C-series phones and many codes together. Such a listing cannot tell you which code is yours, so ignore it.
  • Codes such as BLP877 and BLP875 differ from BLP923 by a few digits. Read all six characters, in good light.

One customer came in asking for "a C series 5000 battery". The counter offered a pack in a similar black wrapper. With the C51 open, the technician read BLP923 and refused the other pack because its code differed and its plug sat off.

Signs your C51 battery is wearing out

Realme C51 battery warning signs with causes and fixes
C51 symptomLikely causeNext step
Charge drops quickly even on light useBLP923 has aged and lost capacityTest C51 health first, then book a BLP923
C51 dies at 15 to 25 percentTired BLP923 cannot give peak currentHave BLP923 tested at a service point
C51 back gaps or screen liftsBLP923 has swollenUnplug and visit service the same day
C51 hot while idleWorn BLP923 or a stuck appRestart the C51, remove the cover, test BLP923

On a C51, check apps and reception first with our drain explainer. Then the health check tells you whether to buy a BLP923.

Bulging, heat, leaks or a dent make BLP923 a fire risk. Unplug the C51 at once, leave the cell unbent and intact, and keep it cool until Realme service sees it. BLP923 copies often claim beyond 5000 mAh, which this slim cell cannot hold, so insist on BLP923 itself.

Replacing the pack and spotting a poor copy

The C51 has a sealed body, so the swap needs tools and a steady hand. Take the C51 to Realme service or a repair shop you already know. Tell them the handset name and the RMX number, and have them match the code on the cell they remove with the new one.

Check a new BLP923 for these faults:

  • It feels lighter than the old BLP923.
  • BLP923 lettering smears with no batch line.
  • The sticker claims more than the slim C51 could hold.
  • The connector is a different width, or the pack is thicker and bulges the back.

Fitting is covered in our replacement walkthrough.

Care habits that help a 5000 mAh pack last

Heat does more harm than anything else. While the C51 charges, keep it away from pillows and dashboards, and remove a heavy case once it warms. Night after night at full charge wears BLP923, so unplug the C51 once full when you can.

Charge the C51 from its 33 W brick or an equally rated one, and replace any cable warming at the plug. C51 screen time hinges on brightness, signal and apps more than mAh, so it can differ from a friend's.

Frequently asked questions

What is the Realme C51 battery model name?

Realme's BLP923 is a polymer cell rated 3.87 V with 5000 mAh typical capacity. The phone's model number is RMX3830. Confirm the code on your own cell sticker before you order.

Does the Realme C51 use BLP923?

Most parts listings say it does. Some of them also name Oppo A-series phones with the same code, and they do not all agree. A technician can verify it when the phone is opened for service.

How many mAh is the Realme C51 battery?

Parts listings give 5000 mAh as the typical figure. A rated value a touch under 5000 mAh may appear on the BLP923 sticker.

Can I use a Realme C53 battery in the C51?

Never assume it. Each phone has its own page for a reason, and capacity alone does not decide the fit. Match the full BLP923 code and plug.

Can I change the Realme C51 battery myself?

It is a sealed phone, and a slip of a tool can puncture the cell. Let Realme service or a trusted technician open the C51.

How do I know a replacement battery is fake?

Counterfeit BLP923 packs tend to be light and blurry, skip batch marks and overstate capacity. Compare the code, weight and connector with the old pack.